J29A subminiature rectangular connectors Catalogue
Brief Introduction
◆ The product is spring male contact, the contact interval is 1.91mm, row distance is 1.65mm. |
◆ Including eight types of contact:9、15、21、25、31、37、51、66cores; |
◆ The section area of cable is:0.15mm2-0.3mm2 |
◆ They are widely used for circuit connector of electrical equipments in the fields of air, space and computers, etc. |
◆ The performance standard: |
Q/Lk.J(02)30-2003 |
The detailed specification for J29A subminiature rectangular connectors |
Q/LK20059-2004 The detailed specification for J29M subminiature rectangular connectors |
Specification
Ambient Temperature Range | -55~+125 ℃ |
Relative Humidity | up to 95% at +40℃ |
Vibration | 10~2000 Hz 200 m/s2 |
Radom Vibration | Power density 0.4G2/Hz total acceleration-root-mean square is 23.1G |
Shock | 120g |
Current Rating | 5A |
Insulation Resistance | ≥5000 MΩ |
Dielectric Strength | 1500 V |
Durability | 500 times |
Water-proof(just suitable for J29M connectors) | Don’t find steam under the water, when △P=1 |
Air-proof(just suitable for J29M connectors) | 1×10-1Pa.cm3/s(△P=1) |
Order Information
■ How To Order |
How to order J29A |
J29A - × TJ/ZK × × - × x (covering) |
① ② ③ ④ ⑤ ⑥ 7 |
①:J29A —Series Prefix |
②: × —Number of Contacts:9、15、21、25、31、37、51、66 |
③:TJ/ZK —Type of Connectors and Contacts:TJ - Pin in the plug ZK - Socket in the receptacle TJ、ZK is fixation couple |
④: × —Mounting mode:No designator for crimp H - Solder N- in-line contact for PCB W - Right Angle for PCB
WI-right angle contact for PCB (reseau: 3.82×2.54) |
⑤: × —Type of Hardware: see “retaining member of J29A”.
“Note: P3, P4, P6, P13, P15 special for J29A-□TJW/ZKW/TJWI/ZKWI connectors” |
⑥: × —Shell Size: no designator for common type (with flat counterbore on the termination end of outer flange ), J29A-□TJW/ZKW/TJWI/ZKWI uses special shell ((with no flat counterbore on the termination end of outer flange, and 4.5×4.5 square hole on the en)
A- type A connectors (the width of outer flange is the same with tail end) A1-the width of outer flange between the common type connectors and type –A connectors 7:x --- Type of tail cover accessories:D、D1、D2 Note :the covering is not included in the ordering information, please mark the cable type in the bracket. For example: the section area, the length and the color of cable. If the relative of connecting cable is complex, please give the connecting cable table. For example J29A - 25 ZK L4 - A1 D2 (covering) Means the J29A connectors with type L4 free end retaining member and type D2 tail cover, the number of contacts is 25, socket in receptacle, the termination style is crimp contact, and the shell size is type A1. (covering: the section area, length and color of cable, etc) |
How to order J29M connectors
J29M - × TJ/ZK × × (covering) |
① ② ③ ④ ⑤ |
①:J29M —Series Prefix (M means“air proof”) |
②: × — Number of Contacts: 9、15、21、25、31、37、51、66 |
③:TJ/ZK —Type of connectors and contacts:
TJ— pin in the plug ZK—socket in the receptacle TJ、ZK is fixation couple |
④: × — Termination Style: no designator – crimp contact H – solder contact |
⑤: × —Hardware:just use the type P5 retaining member |
Note :the covering is not included in the ordering information, please mark the cable type in the bracket. For example: the section area, the length and the color of cable. If the relative of connecting cable is complex, please give the connecting cable table. |
For example |
J29M - 52 ZK H P5 (covering) |
Means the J29M air proof connectors with type P5 fixation end retaining member, the number of contacts is 51, socket in receptacle, and the termination style is solder contact. (covering: the section area, length and color of cable, etc) |
J29A-9TJ |
J29A-15TJ |
J29A-21TJ |
J29A-25TJ |
J29A-31TJ |
J29A-37TJ |
J29A-51TJ |
J29A-66TJ |
J29A-9ZK |
J29A-15ZK |
J29A-21ZK |
J29A-25ZK |
J29A-31ZK |
J29A-37ZK |
J29A-51ZK |
J29A-66ZK |
J29A-9TJH |
J29A-9ZKH |
J29A-15ZJH |
J29A-15ZKH |
J29A-25TJH |
J29A-25ZKH |
J29A-37ZJH |
J29A-37ZKH |
J29A-51TJH |
J29A-51ZKH |
J29A-66TJH |